At the heart of our compressor lies the Air Ends – the pinnacle of efficiency and reliability. These oil-injected screw air ends provide ultimate efficiency with reduced noise, offering a longer life cycle with increased bearing dimensions. Most air ends are only good for up to 40,000 hours and then they need a complete overhaul, with our air ends they are good for 70,000 running hours as long as the unit is maintenance routinely.
1750RPM Premium Industrial Motors
We use only premium industrial name brand motors to run our compressors. We have chosen motors that come with the best certificates and quality assurances so we know that you are getting the best as well! We use High Efficiency motors constructed with superior materials, higher service factors, longer bearing lives, lower waste- heat output and less vibration our low RPM 1,750 motors deliver 2X starting torque and minimize harmonic distortion, giving you a quieter, more reliable compressor.
Drive-Tek™ Design
Reduces energy demand up to 33% No belts to maintenance!
Spin-Tek™ Design
Unique easy access oil filters & air/oil separators, requires minimal tools to remove/install saving time and money.
Precision Engineered Rotary Air End
Highly efficient design provides maximum discharge
Heavy Duty Sound Attenuated Cabinet
Provides lower decibel operation than a typical rotary screw
Programmable Logic Controller
These rotarys are controlled by a user friendly Logika PLC (Programmable Logic Controller). This controller makes this unit bullet proof. These controllers have may many features that are extremely user friendly and easy to use. Here are some of its key features.
Adjust Pressure
To what pressure range you need. This can be set by the customer, this unit has a shutdown in case the unit goes over pressure. the unit has a maximum pressure setting – the computer will sense that it is going over pressure and will shut down.
High Voltage Fault
If the voltage is 15% over the power supply voltage rated on the Emax compressor data plate, the unit will shut down. Also if the voltage is 15% under it will shut is down as well.
Light
Has a built in light for dark locations.
Fault History
The PLC stores history if the unit shuts down, information on why it shut down is stored
Built in Timer
Will sense when the unit is not being used for a period of 20 minutes under no load, this will shut down the machine automatically so it will restart as air pressure goes down to the kick- in set point.
Self-Start
If the power is lost this unit will automatically restart itself, this eliminates a maintenance crew to have to restart after a shutdown.
Low Oil Shutdown
If the controller senses that the unit is going into high temperature it will shut it down. It will also shut down if the compressor runs low on oil.
Over AMP Shut down
If the motor is pulling to many amps it will shut down. You can check the amp draw of the electric motor as it is running and also on the exhaust fan motor.
Parameters
Has a maintenance parameter system to create and maintain the parameter and control information.
Maintenance Service
Keeps track of when to change the air filter, oil filter and the coalescing filter along with the unit needs greased. When they need changed the PLC will sound an alarm. After changing you simply reset that filter back to zero and start the maintenance tracker again.
On- line demand
This setting is made for high volume and will bypass the automatic kick-off mode. It allows the unit to keep running on continuous run mode for high air demand.
Master Slave
This controller can switch from one unit to the other and maintain the same use of hours, it can adjust the pressure to be the lead or the lag unit
Reverse Fault
The controller will control when the unit is wired up if it is running backwards, it will sense a reverse rotation fault and shut the unit down
Clock and Date
Built in Clock and Date to help keep track of preventative maintenance services.
Hour meter
Built in hour meter to keep track of the running hour on the machine.
Air Differential Control
With differential control you have a wide range of pressure settings. You can take the kick-in pressure all the way down to 100 PSI and all the way up to 145 PSI. You can adjust this range anywhere in between. You can also set the high end down to a lower pressure where ever the customer unit pressure is desired. The Emax Compressor is factory set at 120 kick in and 145 kick out. The lower the pressure the higher CFM and the more hours you will get on your screw compressor, so keep the pressure as low as possible.
Daily / weekly Schedule
This unit can be programmed to start and shutdown by a set schedule
UL/CSA compliant
Our switchgear and variable speed drives are UL/CSA compliant. With Y/Delta soft start contactors, our compressors can save you up to 33% in energy costs during startup and up to 40% while in operation.
VMC Inlet Valve
The VMC inlet valve ensures efficiency and energy savings. Its load and unload system allows for more air storage during no-load cycles. And with a modulator valve that remains closed during startup, you’ll experience low load and extended life for the magnetic starter contractor, and motor.
Pre-Filtration
Our rotary screw air compressors also feature Pre-Filtration, extending the life of your compressor and ensuring peak performance.
Filters
Filters help protect the compressor from wear and damage. It is the most inexpensive way to prevent potentially costly repairs. It is vital that these filters are replaced and inspected on a routine basis, as it reduces the chances of component and air-end contamination. Not changing the filters, on a regular basis, decrease the energy efficiency of the compressor. We use only genuine Mann Filters. These Filters are not exclusive to us, therefore, after your warranty is up, you will still be able to find these parts. Mann Filters are made with exceptional quality and provide optimum protection against harmful elements. Our rotary screw air compressors also have Pre-Filtration, on the outside of the cabinets. Although this is an upgraded feature, it is one that is well worth the cost to extend the life of your compressor. Even in environments that are not particularly dirty, the buildup, over time, can be damaging to the system and negatively impact the performance of the compressor. Ask about adding a Pre-filter Kit to your system, to save even more money.
The Best Warranty In the Industry
Eaton Compressor, backs all our rotary screw air compressors with the best extended warranty in the industry – a full 10 years – and it is NOT pro-rated. Make sure to research and ask questions, when comparing warranty information. Be certain, when you buy, that you are getting a FULL warranty. A Pro-Rated warranty means that, the older the compressor gets, the more risk that you may have to pay out of your own pocket should it need repair. With our warranty, we don’t ask you to buy a service plan, or extended warranty – we just ask that you purchase and use our oil and filters. This ensures the correct oil and filters to keep your rotary screw air compressor running for years to come. Our trained service and support team is ready to assist you, if you ever need them and we carry a full line of air compressor replacement parts.